Posted on

If you have a home with a garage, then most likely you have a garage door. If you have a garage door, from time to time you’re going to experience malfunctions. If your car is inside when these problems happen, you may not be able to get your car out in time to go to work. If you can’t get to work, you may lose your job. If you lose your job, you could also lose your house. If you lose your house, you won’t have to worry about garage door issues any more. However, if you would prefer to go a different route, it’s a good idea for you to learn some simple garage door repairs that can help you get out and get going.

Image result for locksmith in Hanover

Once or twice a year you need to perform preventive maintenance on your door and opener which will help you avoid unexpected breakdowns in service. One of the biggest culprits which is easy to fix is dirty, dry door tracks. Tracks should be cleaned in order to keep them free of debris which can build up to a point where it will keep your door from operating the way it should. This can be done using any type of household solvent. You should also lubricate the tracks and all moving parts of the door. Make sure the nuts and bolts are tight. If you can see any parts, such as chains, belts, or pulleys, which are showing wear or rust, you need to replace them schl├╝sseldienst in Hannover.

Some issues can’t be avoided, but they can be planned for. For example, what do you do in a power outage? If you use an electric opener, this problem may well affect you at some point. Therefore, you need to install an emergency release kit which will allow you keyed access to your car and other garage items in case there is no power. These kits are designed to be installed easily.

Any number of garage door problems can be attributed to a faulty close limit switch. You can find this switch in or around the opener’s box. If you’re lucky, the manufacturer has labeled it for you to find easily. If it isn’t operating correctly, then you may find that your door won’t close completely, the motor never shuts off, or the door reverses direction before it is completely closed. Disconnect the power prior to working on the limit switch.

If a time comes (for example a power outage or other emergency) when you have to use the emergency release lever, you may discover that your door opener doesn’t work as well following the incident. This condition is likely because the emergency lever was disengaged by the opener’s chain and needs to be snapped back into place.

Leave a Reply

Your email address will not be published. Required fields are marked *